Your machine now tells you what its fans are doing and lets you ask for quieter ones. Desktop ships
pengyos-hwmon, a COSMIC hardware monitor: temperatures, fans, voltages, clocks, power and disk
health in one table, each sensor with a warning limit. Server ships the same tool as a terminal view,
so over ssh or on the console you get the same table with the same limit colours plus the hardware
inventory; on Desktop it starts in the terminal by itself when there is no display, and
pengyos-hwmon --check prints every sensor as plain text. It is built on HWall's collectors (MIT,
pinned).
Fan control is pengyos-fans 0.2.0: profiles of quiet, balanced, full, or as the firmware set them,
plus per-fan curves. Run sudo pengyos-fans detect first, which finds which control drives which
fan. On Nuvoton boards the profile is written into the chip's own curve, so the chip keeps running it
with nothing on the host. Fans the chip cannot run, a USB controller, another chip, or a fan told to
follow the GPU, get a software curve from pengyos-fans.service, and that service hands each fan
back to the chip, the device, or full speed when it stops. The Hardware Monitor has a Fans view with
an editor for each fan's name and curve, and a Fans applet in the Desktop panel switches profile in
one click. The applet is invisible on machines with nothing to control. Administrators at the
computer change fan settings without a password, via a polkit rule that covers pengyos-fans only
(60-pengyos-fans.rules).
The readings themselves were wrong before, in two places. Temperature limits now come from the kernel:
hwall-core hides kernel limits whenever lm-sensors is present, and PengyOS always ships lm-sensors,
so every limit in the table had been a default. NVMe's "no threshold" value, 65261 °C, is no longer
read as a limit. Every edition now ships the ITE, Fintek and Winbond Super-I/O drivers with the ASUS
EC/WMI and DIMM sensor drivers, and the Super-I/O ones are loaded at boot by
60-pengyos-sensors.conf because they cannot auto-load; a Desktop board gains 34 to 43 sensors. The
kernel also carries the in-tree drivers for USB fan controllers, AIO coolers and PSUs: Corsair
Commander Pro and HXi/RMi/AXi PSUs, NZXT Kraken (X42-X72, X53-Z73, 2023) and the RGB & Fan
Controller, Aquacomputer D5 Next, Octo and Quadro, ASUS ROG Ryujin II/III and Gigabyte Waterforce.
Each loads only when its device is plugged in.
kernel.perf_event_paranoid is 0 on every edition (60-pengyos-perf-events.conf) so the monitor can
read CPU power and effective clocks. That was an operator decision, and it opens a side channel
between local processes.